ANALISA PENYEBAB KERUSAKAN DAN PERBAIKAN PADA BELT CONVEYOR DI PT. MIFA BERSAUDARA

M Qadafi, Maidi Saputra, Joli Supardi

Abstract


The purpose of this study is to find out the cause of the damage and how the repair of the belt conveyor was carried out by the Maintenance team pt. MIFA Brothers and know the components of the conveyor belt in PT. MIFA Brothers. a Belt conveyor is one of the material transportation tools that use a running system that is very commonly used to move solid materials with short-distance designs up to long distances. Type of damage to the conveyor belt that occurs in PT. Mifa Brothers include damage to the impact roller, wear and tear on the rubber diamond, wear and tear on the carry roller, damage to the belt, and damage to linear plates. The cause of damage to the conveyor belt that occurred in PT. MIFA Brothers among others there are 4 points based on fishbone diagrams among others: a. Material (standard or not material condition). b. Machine (malfunction or any design errors in the main equipment). c. Environment (the state of the environment around the conveyor belt work area). d. Human Error (operating errors, surrounding environment such as ocean currents, and cleanliness of equipment). In its maintenance can be done Daily Inspection (Daily Inspection), Monthly Inspection/Examination Conveyor)  and Annual Inspection.

 

Keywords: Belt conveyor, Cause of damage, PT. MIFA Bersaudara.


Full Text:

PDF

References


Alfian, H. 2011. Analisa Pengaruh Ukuran Butir dan Tingkat Kelembaban Pasir Terhadap Performansi Belt conveyor pada Pabrik Pembuatan Tiang Beton. Jurnal Dinamis Fakultas Teknik Usu,Volume.II No.8. Medan

Aosoby, R., Rusianto, T., & Waluyo, J. (2016). Perancangan Belt conveyor sebagai Pengangkut Batubara dengan Kapasitas 2700 Ton/Jam. Jurnal Teknik Mesin, 3(1), 45-51.

Barus, R. H., Komar, S., & Suwardi, F. R. (2017). Analisis Kinerja Belt Conveyor Untuk Optimalisasi Pengangkutan Bijih Nikel Di PT. Aneka Tambang Tbk Ubpn Pomalaa. Jurnal Pertambangan, 1(4).

Bimasakti, M. S., & Hasjim, M. (2019). Evaluasi Kinerja Belt Conveyor Dari Crusher Limestone 1 Menuju Stockpile Untuk Mencapai Target Produksi Batu Kapur Pada Bulan April 2018 Di PT Semen Baturaja (Persero) Tbk. Jurnal Pertambangan, 3(2), 32-40.

Jullimursyida, J., & Mariyudi, M. (2017). Review International Journal-Managemen Model Limited Cash Transactions for the Eradication of Corruption and Money Laundering Indonesia. Indonesian Journal of Educational Review, 4(1), 74-83.

Khodijah, S. L., & Rahardjo, S. T. (2015). Analisis Faktor-Faktor Penyebab Kerusakan Produk Pada Proses Cetak Produk (Studi Kasus pada Majalah SAKINAH PT. Temprina Media Grafika-Jawa Pos Group-Semarang) (Doctoral dissertation, Fakultas Ekonomika dan Bisnis).

Mujayyin, F., & Gunarso, D. A. (2018). Performa Mesin Pengolah Sampah Tpa Menjadi Bahan Bakar Refuse Derived Fuels Dengan Metode Six Sigma Dmaic. Indonesian Journal of Educational Review, 4(1), 74-83.

Prabawa, A. (2009). Analisis Faktor-Faktor yang Mempengaruhi Tingkat Pendapatan Asli Daerah (PAD) Kabupaten Banyumas. Jurnal Ekonomika Universitas Wijayakusuma Purwokerto, 12(3), 23171.

PT. MIFA Bersaudara (Persero), 2021. Industri | Update, Profil PT. MIFA Bersaudara, Aceh Barat, July 2021, http://www.mifacoal.co.id/id-id/

Syarifuddin, M. A., & Suriyanto, S. (2019). Analisis Penyebab Utama Kerusakan Belt conveyor Pada BC 6 System Menggunakan Metode Fishbone Diagram. In SEMNASTERA (Jurnal Teknologi dan Riset Terapan) (Vol. 1, pp. 223-228).


Refbacks

  • There are currently no refbacks.