Rancang Bangun Alat Pengolah Limbah Plastik Berbahan Bakar Biomassa

Pribadyo Pribadyo

Abstract


Plastic is a material that is widely used in daily life, because it has advantages such as

strong,  lightweight  and  stable. But  the  plastic  on  the market  today  are  synthetic polymers made from petroleum are difficult to decompose in nature. Judging from the nature of the plastic constituent is composed of components of petroleum hydrocarbons, the plastic waste has the potential to be converted into fuel. The technique used to restore the plastic material is by breaking the carbon chains or polymers that become hydrocarbons. The purpose of the design tool processing waste plastics into fuel oil- fired biomass is to design a waste treatment plant in the plastic to produce oil (fuel), making the design drawings of the equipment is planned, determine the materials to be used,  make  and  assemble  the apparatus  according  to  the  design  the planned. In pyrolysis occurs tool decomposition process of organic compounds on the materials. This decomposition caused by the heating process without dealing directly with the air with little oxygen. Waste processing equipment plastic that will be planned to include the design of the combustion chamber, reactor design, pipeline design fence steam, design connecting pipe between the reactor and the pipe fence steam. Extensive volume of reactor tubes obtained then has acquired equipment capacity 4 kg / production.


Full Text:

PDF

References


Sularso, 1987, “Dasar Perencanaan dan Pemilihan Elemen Mesin”, Pradnya

Paramita, Jakarta.

Surdia Ms. Met. E., Prof, Ir. Tata Dan Saito, Prof. DR. Shinroku, Pengetahuan Bahan

Teknik,PT. Pradnya Paramita Jalan Bunga 8-8A,Jakarta, 2000.

Kadir, 2012. “Kajian Pemanfaatan Sampah Plastik Sebagai Sumber Bahan Bakar

Cair”, Dinamika Jurnal Ilmiah Teknik Mesin, ISSN : 2085-8817, Vol. 3 No. 2

Budi Surono, Untoro, 2013. “Berbagai Metode Konversi Sampah Plastik Menjadi Bahan Bakar Minyak”, Jurusan Teknik Mesin Universitas Janabadra Yogyakarta, ISSN 2088-3676.

Budiyantoro, C., 2010, Thermoplastik Dalam Industri, Teknika Media, Surakata.

Das, S. dan Pande, S., 2007, Pyrolysis And Catalytic Craking Of Municipal Plastic Waste For Recovery Of Gasoline Range Hydrocarbons, Thesis, Chemical Engineering Department National Institute Of Technology Rourkela.

Wahyudi, I., 2001. Pemanfaatan Blotong Menjadi Bahan Bakar Cair Dan Arang Dengan Proses Pirolisis. Jurusan Teknik Lingkungan FTSP UPN “Veteran” Jatim.

Ramadhan, Aprian., P Dan Ali, Munawar, Pengolahan Saampah Plastik Menjadi Minyak Menggunakan Proses Pirolisis, Progdi Teknik Lingkungan, Fakultas Teknik Sipil Dan Perencanaan, Universitas Pembangunan Nasional “Veteran” Jawa Timur

Daryanto, Drs., 2007, Dasar-Dasar Teknik Mesin, PT Rineka Cipta, Jakarta.

Mikell P. Groover, 2010, Fundamentals of Modern Manufacturing, John Wiley & Sons, United States

W Kenyon, Dines Ginting. 1985. Dasar-Dasar Pengelasan. Erlangga. Jakarta.

Caglar, A., & Aydinli, B., 2009, “Isothermal co-Pyrolysis of Hazelnut Shell and

Ultra-High Molecular Weight Polyethylene: the Effect of Temperature and

Composition on the Amount of Pyrolysis Products”, Journal of Analytical and

Applied Pyrolysis. 86 , 304–309.

Fajri Nugraha, Mahendra., Wahyudi, Arifuddin dan Gunardi, Ignatius., Pembuatan

Fuel Dari Liquid Pirolisis Plastik Polipropilen Melalui Proses Reforming Dengan Katalis NiO/T-Al2O3, Jurusan Teknik Kimia, Fakultas Teknologi Industri, Institut Teknologi Sepuluh Nopember (ITS), Jl. Arief Rahman Hakim, Surabaya 60111 Indonesia, Jurnal Teknik Pomits Vol.2, No. 2, (2013) ISSN: 2337-

(2301-9721 Print)

Http://pelastikjadiminyak.blogspot.com/2013/07/ecogreen-alat-pengolah-sampah- pelastik.html.

Http://bsn.go.id/main/berita/berita_det/2160#.VNWT-l1b-o8.

Http://wanakencanagroup.com/?page_id=3396

Http://duaputrapetir.indonetwork.co.id/4726556/pipa-seamless-pipa-stainless-steel- pipa-hitam-pipa-galvanis.htm

Http://sekolah007.blogspot.ca/2013/04/metalografi-adalah-suatu-teknik-atau.html

Http://id.wikipedia.org/wiki/Pengukuran

Https://yefrichan.wordpress.com/category/bahan-kuliah/page/18/

Http://misranindustri.blogspot.co.id/2014/02/pengelasan.html




DOI: https://doi.org/10.35308/jmkn.v5i1.1623

Refbacks

  • There are currently no refbacks.