Baseline Strength Differences and Post-Immersion Compressive Performance of Concrete Reinforced with Chemically Untreated Abaca Fibers under Sulfuric Acid Exposure

Teuku Farizal, Dian Febrianti, Teuku Budi Aulia, Sugiarto Sugiarto, Mohd. Iqbal, Al Munawir

Abstract


Comparative assessment of post-immersion compressive strength requires consideration of the initial mechanical differences between concrete formulations. This study investigated normal concrete (BN) and ordinary Portland cement concrete reinforced with chemically untreated abaca fibers (BSPA; 55 mm length, 0.70% by cement mass), without supplementary cementitious materials. Separate cylindrical specimens (150 × 300 mm; three per group) were tested at 28 days without exposure or at 42 days following 14 days of immersion in a nominal 5% v/v dilution of commercial sulfuric acid reagent. Nine previously unpublished compressive-strength observations were analyzed alongside three attributed, previously published BN reference measurements. The mean compressive strengths of BN and BSPA were 35.171 and 47.310 MPa, respectively, at the reference condition, compared with 29.819 and 43.669 MPa after immersion. The corresponding BSPA–BN strength differences were 12.139 and 13.850 MPa, yielding a formulation-by-condition interaction estimate of +1.711 MPa (Welch–Satterthwaite 95% confidence interval: −11.404 to +14.826 MPa). BSPA therefore exhibited a substantial compressive-strength advantage under both testing conditions, although the additional change in this advantage remained statistically uncertain. Because specimen age and sulfuric acid exposure varied simultaneously and independent production-batch replication was unconfirmed, the comparison does not independently establish improved acid resistance. By integrating new formulation-specific measurements with a baseline-informed comparison, this study provides a more rigorous interpretation of post-immersion compressive performance in chemically untreated abaca fiber-reinforced concrete.


Full Text:

PDF

References


Huber, B., Hilbig, H., Drewes, J.E., Müller, E. (2017). Evaluation of Concrete Corrosion after Short- and Long-Term Exposure to Chemically and Microbially Generated Sulfuric Acid. Cement and Concrete Research 94: 36. doi:10.1016/j.cemconres.2017.01.005.

Grandclerc, A., Dangla, P., Guéguen-Minerbe, M., Chaussadent, T. (2018). Modelling of the Sulfuric Acid Attack on Different Types of Cementitious Materials. Cement and Concrete Research 105: 126. doi:10.1016/j.cemconres.2018.01.014.

Min, H., Song, Z. (2018). Investigation on the Sulfuric Acid Corrosion Mechanism for Concrete in Soaking Environment. Advances in Materials Science and Engineering 2018(1): 3258123. doi:10.1155/2018/3258123.

Cao, R., Yang, J., Li, G., Liu, F., Niu, M., Wang, W. (2022). Resistance of the Composite Cementitious System of Ordinary Portland/Calcium Sulfoaluminate Cement to Sulfuric Acid Attack. Construction and Building Materials 329: 127171. doi:10.1016/j.conbuildmat.2022.127171.

Youssari, F.Z., Taleb, O., Benosman, A.S. (2023). Towards Understanding the Behavior of Fiber-Reinforced Concrete in Aggressive Environments: Acid Attacks and Leaching. Construction and Building Materials 368: 130444. doi:10.1016/j.conbuildmat.2023.130444.

Zhang, C., Li, J., Yu, M., Lu, Y., Liu, S. (2024). Mechanism and Performance Control Methods of Sulfate Attack on Concrete: A Review. Materials 17(19): 4836. doi:10.3390/ma17194836.

Awrahman, A.H., Eren, N.A., Çevik, A., Mohammed, A.A. (2024). Experimental Study on Direct Shear Strength of Fiber Reinforced Self Compacting Concrete under Acid and Sulfate Attack. Periodica Polytechnica Civil Engineering 68(2): 392. doi:10.3311/PPci.22519.

Xu, W., Yang, L., Gao, D., Tang, J., Zhang, S., Meng, Y. (2024). Long-Term Mechanical Properties of Steel Fiber Reinforced Concrete under Sulfuric Acid Attack. Tunnelling and Underground Space Technology 153: 105977. doi:10.1016/j.tust.2024.105977.

Kohzadi, A., Behfarnia, K. (2025). Flexural Behavior of Kenaf Textile-Reinforced Concrete Exposed to Sulfuric Acid (H₂SO₄) Solution. Case Studies in Construction Materials 22: e04861. doi:10.1016/j.cscm.2025.e04861.

Onuaguluchi, O., Banthia, N. (2016). Plant-Based Natural Fibre Reinforced Cement Composites: A Review. Cement and Concrete Composites 68: 96. doi:10.1016/j.cemconcomp.2016.02.014.

Laverde, V., Marin, A., Benjumea, J.M., Rincón Ortiz, M. (2022). Use of Vegetable Fibers as Reinforcements in Cement-Matrix Composite Materials: A Review. Construction and Building Materials 340: 127729. doi:10.1016/j.conbuildmat.2022.127729.

Hamada, H.M., Shi, J., Al Jawahery, M.S., Majdi, A., Yousif, S.T., Kaplan, G. (2023). Application of Natural Fibres in Cement Concrete: A Critical Review. Materials Today Communications 35: 105833. doi:10.1016/j.mtcomm.2023.105833.

Wu, H., Shen, A., Cheng, Q., Cai, Y., Ren, G., Pan, H., et al. (2023). A Review of Recent Developments in Application of Plant Fibers as Reinforcements in Concrete. Journal of Cleaner Production 419: 138265. doi:10.1016/j.jclepro.2023.138265.

Lee, G.-W., Choi, Y.-C. (2022). Effect of Abaca Natural Fiber on the Setting Behavior and Autogenous Shrinkage of Cement Composite. Journal of Building Engineering 56: 104719. doi:10.1016/j.jobe.2022.104719.

Alcivar-Bastidas, S., Petroche, D.M., Martinez-Echevarria, M.J. (2023). The Effect of Different Treatments on Abaca Fibers Used in Cementitious Composites. Journal of Natural Fibers 20(1): 2177235. doi:10.1080/15440478.2023.2177235.

Arvizu-Montes, A., Alcivar-Bastidas, S., Martinez-Echevarria, M.J. (2025). Experimental Study on the Effect of Abaca Fibers on Reinforced Concrete: Evaluation of Workability, Mechanical, and Durability-Related Properties. Fibers 13(6): 75. doi:10.3390/fib13060075.

Farizal, T., Aulia, T.B., Sugiarto, Iqbal, Mohd. (2026). Optimization of Abaca Fiber Content in Cementitious Composites to Improve Mechanical Performance at Early and Design Ages. E3S Web of Conferences 694: 01012. doi:10.1051/e3sconf/202669401012.

Azeem, A., Akhtar, J.N., Khan, R.A. (2026). Mechanical and Durability Enhancement in Zeolite-Based Concrete Reinforced with Alkali-Treated Abaca Fibre. Journal of Building Engineering 119: 115215. doi:10.1016/j.jobe.2026.115215.

Sharma, S., Vats, F., Basu, D. (2026). Integrating Durability in Concrete Mix Design for Enhanced Structural Performance and Remaining Life Estimation. Construction and Building Materials 519: 145849. doi:10.1016/j.conbuildmat.2026.145849.

ASTM International. (2026). ASTM C143/C143M-26b: Standard Test Method for Slump of Concrete. doi:10.1520/C0143_C0143M-26B.

ASTM International. (2026). ASTM C192/C192M-26a: Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory. doi:10.1520/C0192_C0192M-26A.

ASTM International. (2024). ASTM C39/C39M-24: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. doi:10.1520/C0039_C0039M-24.

Panugalla, R.R., Rayana, H., Kolli, R., Jain, L. (2025). Optimizing Mix Design of Hybrid Fiber Reinforced Concrete with Abaca and Polypropylene Fibers through Taguchi Method and Grey Relational Analysis Approach. Green Technologies and Sustainability 3(3): 100200. doi:10.1016/j.grets.2025.100200.




DOI: https://doi.org/10.35308/jmkn.v12i2.16618

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Mekanova: Mekanikal, Inovasi dan Teknologi
p-ISSN: 2477-5029  I  e-ISSN: 2502-0498  I  DOI: 10.35308
Jl. Alue Peunyareng, Ujong Tanoh Darat, Meureubo, Kabupaten Aceh Barat, Aceh 23681, Indonesia
License Creative Commons is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License