ANALISA BAHAN BAKAR SERABUT DAN CANGKANG PADA KATER UAP KAPASISTAS 20 TON/JAM DI PT. BEURATA SUBUR PERSADA
Abstract
Limited Liability Company (PT) Beurata Subur Persada is a large company engaged in palm oil processing with an area of approximately 23 hectares of activity. In the processing there is a steam catter/boiler working tool. This steam boiler engine is often used as a production engine in industrial companies. Steam boiler or boiler is a container that is very tightly closed in which the heat of combustion flows until hot steam is formed. The analysis uses a data processing application, then the calculation and data retrieval starts from march 11 to August 13 2021. The results of the study state that the components of the steam boiler at a capacity of 20 Tons/hour are the most important, namely the burner, evaporator pipe, combustion chamber, water reservoir. from economizers, superheaters, steam heaters and ash or ash collection devices from combustion. Calculations at a high calorific value (HHV) of 5,691.17 Kcal/Kg and a low calorific value (LHV) of 4,608.96 Kcal/Kg used shell and fiber fuel with a ratio of 3:1 with a percentage of 25% shell and 75% fiber.
Keywords: Steam Boiler,Heat Value, PT. Beurata Subur Persada
Full Text:
PDFReferences
[PT. Beurata Subur Persada, 2021]. Industry | Update, Profil PT. Beurata Subur Persada, Nagan Raya, July 2021, ACEH
Erfinawati, E. (2019). Tema dan amanat Cerita Rakyat Tripa Makmur Kabupaten Nagan Raya. Serambi Konstruktivis, 1(3). Provinsi Nagan Raya, ACEH.
Hasibuan, Harry Christian dan Napitupulu, Farel H. 2013. Analisa Pemakaian Bahan Bakar Dengan Melakukan Pengujian Nilai Kalor Terhadap Performansi Ketel Uap Tipe Pipa Air Dengan Kapasitas Uap 60 Ton/Jam. Medan: Universitas Sumatera Utara
Nasution, A., Nasution, M., & Rizal, P. (2020). Analisa Bahan Bakar Ketel Uap Dengan Kapasitas 30 Ton/Jam Pada Pks Ptpn Iv Kebun Adolina. Piston (Jurnal Ilmiah Teknik Mesin Fakultas Teknik UISU), 4(2), 86-88.
Perpres 22 Tahun 2017, “Rencana Umum Energi Nasional”. Jakarta
PT. Beurata Subur Persada, 2021. Industry | Update, Profil PT. Beurata Subur Persada, Nagan Raya, July 2021, ACEH
Qamaruddin, Q., & Sikki, M. I. (2016). Analisis Kebutuhan Bahan Bakar Terhadap Perubahan Tekanan Uap. Jurnal Ilmiah Teknik Mesin Unisma" 45" Bekasi, 4(2), 98457.
Rosmiati, R., Donda, D., Barus, A., & Fachrydzi, M. (2019). Perhitungan Kebutuhan Bahan Bakar Cangkang Sawit Dan Tongkol Jagung Pada Unit Thermal Oil Heater Di PT Shamrock Manufacturing Corpora. Ready Star, 2(1), 201-206.
Saputra, A. J., 2007. Analisis Kebisingan Peralatan Pabrik dalam Upaya Peningkatan Penaatan Peraturan Keselamatan dan Kesehatan Kerja PT. PUPUK KALTIM. [Tesis]. Universitas Diponegoro.
Sugiyono, Agus. 2016. “Outlook Energi Indonesia 2016”. Jakarta: Pusat Teknologi Sumberdaya Energi dan Industri Kimia BPPT.
Suhardi, B., 2008. Perancangan Sistem Kerja dan Ergonomi Industri. Jakarta : Direktorat Pembinaan Sekolah Menengah Kejuruan, Direktorat Jenderal Manajemen Pendidikan Dasar dan Menengah, Departemen Pendidikan Nasional.
Sukania, I. W., 2013., Kajian Ergonomi Terminal Bus di Jakarta. Jurnal Ilmiah Teknik Industri 1(1),33 - 40.
Wang, Y., Wang, Y., Hosono, E., Wang, K., & Zhou, H. (2008). The design of a LiFePO4/carbon nanocomposite with a core–shell structure and its synthesis by an in situ polymerization restriction method. Angewandte Chemie International Edition, 47(39), 7461-7465.
World Coal Institute, 2005. Sumber Daya Batu Bara, Tinjauan Lengkap Mengenai Batu Bara. www.worldcoal.org.
Zakiah, Z., Safrida, S., & Santri, L. (2015). Pemetaan Komoditas Unggulan Sub Sektor Perkebunan Di Kabupaten Aceh Selatan. Jurnal Agrisep, 16(1), 35-52.
Zulfikri, S., & Hasriyanti, N. (2020). Kajian Pemilihan Bahan Lokal Terhadap Durabilitas Untuk Rumah di Pinggir Sungai. Jurnal Ilmiah Teknik Industri.
DOI: https://doi.org/10.35308/jmkn.v7i2.4242
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.