Evaluasi Desain Struktural Hoist Crane 16 Ton di PLTM Pantan Cuaca 4,5 MW di Provinsi NAD

M. Husni Malik Hasibuan, Muhammad Diaz Ariansyah, Bangun Pasaribu

Abstract


Power House (PH) is one of the buildings that functions as a production house that produces electrical energy. In general, the power house structure at mini hydro power plants (PLTM) in Indonesia uses heavy steel structures. The design criteria and technical planning of steel structures in the power house used include SNI 1726; 2019, SNI 1727; 2020, SNI 1729; 2020, SNI 7860; 2020, and SNI 7972;2020. The calculation of steel structures in power houses uses the LRFD (Load And Resistance Factor Design) method and for structural analysis ETABS software is used. Analysis of the power house structure is carried out to check the condition of the existing design of the profile used while re-analysis is carried out to obtain a safe profile for use in the power house. Based on the results of the analysis obtained that the WF 400x200x8x13 profile steel is still safe to use as the main column in the power house structure. For beams, the profile steel that is safe to use is WF 300x150x6.5x9. As for the runway beam and column bracket (console beam) still use the existing steel profile design, namely WF 500x200x10x16


Full Text:

PDF

References


H. Widiarto and A. Samanhudi, “Rancangan pemanfaatan tenaga surya sebagai sumber energi di Gedung Power House Bandara Banyuwangi,” Knowl. J. Inov. Has. Penelit. dan Pengemb., vol. 3, no. 3, pp. 195–204, 2023, doi: https://doi.org/10.51878/knowledge.v3i3.2437.

Z. Sandy Pica, S. Syahbuddin, and E. Djatmiko, “Proses pembuatan komposit Baja ASTM A 615 M Oxide Dispersed Strengthening (ODS) berpenguat Alumina,” J. Syntax Admiration, vol. 2, no. 4, pp. 731–745, 2021, doi: 10.46799/jsa.v2i4.206.

E. Pradipto and K. Tristanto, “Ketahanan sistem struktur bangunan terhadap angin studi kasus : Mbaru Niang di Desa Wae Rebo, Kabupaten Manggarai, NTT,” J. Arsit. Pendapa, vol. 4, no. 1, pp. 01–07, 2021, doi: 10.37631/pendapa.v4i1.276.

F. Sustiawan and A. E. Husin, “Analisa RII (Relative Important Index) terhadap faktor-faktor yang Berpengaruh dalam mengimplementasikan BIM 4D dan M-PERT pada pekerjaan struktur bangunan hunian bertingkat tinggi,” J. Apl. Tek. Sipil, vol. 19, no. 4, p. 417, 2021, doi: 10.12962/j2579-891x.v19i4.9336.

E. H. Manurung, A. Prajoko, O. Sitohang, and H. Haryanto, “Analisis biaya dan waktu pekerjaan konstruksi struktur rangka atap baja portal frame dan portal truss,” J. Rekayasa Konstr. Mek. Sipil, vol. 6, no. 1, pp. 31–39, 2023, doi: 10.54367/jrkms.v6i1.2557.

R. F. Manope, H. Manalip, and B. M. M. Ointu, “Analisis portal struktur baja berdasarkan konfigurasi tipe Dan variasi panjang link sistem Ebf (Eccentrically Braced Frames),” J. Sipil Statik, vol. 7, no. 9, pp. 1191–1196, 2019, [Online]. Available: https://ejournal.unsrat.ac.id/v3/index.php/jss/article/view/24614

J. O. Simanjuntak, E. O. Zai, and V. C. Damanik, “Analisis perhitungan rangka batang dengan menggunakan metode keseimbangan titik buhul dan metode ritter (Studi Literatur),” J. Constr., vol. 3, no. 1, pp. 1–9, 2023, [Online]. Available: https://ejournal.uhn.ac.id/index.php/construct/article/view/1273

F. Fuad, A. Tata, and I. Imran, “Analisis struktur atap rangka ruang Space Truss,” J. Sipilsains, vol. 10, no. 1, pp. 53–62, 2020, doi: https://doi.org/10.33387/sipilsains.v10i1.2389.

A. Arhami, I. Hasanuddin, and M. Masri, “Optimization process of the Truss Structure using Finite Element Analysis: Step by step from 2D to 3D space,” Polimesin, vol. 20, no. 2, pp. 121–127, 2023, doi: http://dx.doi.org/10.30811/jpl.v21i4.3933.

Z. H. Siregar, U. N. Harahap, and M. Zurairah, “Perencanan bahan baku menggunakan metode Min-Max pada PT Pacific Palmindo Industri,” Talent. Conf. Ser. Energy Eng., vol. 3, no. 2, pp. 756–764, 2020, doi: 10.32734/ee.v3i2.1073.

Z. H. Siregar, Mawardi, A. Ramadhan, P. Rigitta, S. P. Simorangkir, and D. Suita, “Analisis impak tegangan dan regangan pada spesimen batang marka jalan menggunakan Air Gun Compressor,” G-Tech J. Teknol. Terap., vol. 6, no. 2, pp. 295–305, 2022, doi: 10.33379/gtech.v8i1.3787.




DOI: https://doi.org/10.35308/jmkn.v10i1.9438

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.