ANALISIS KEKUATAN KOMPOSIT IJUK SEBAGAI BAHAN PENGGANTI FIBERGLASS PADA KAPAL

Muhammad Agam Thahir, Muhammad Arif Nasution, Hafinuddin Hafinuddin, Surya Bima Ridho Mutaqin

Abstract


Abstract

This study uses a quantitative experimental method using a Completely Randomized Design (CRD) with 2 treatments and 3 replications. The palm fibers composite was made by following the compression test standard of SNI 03-3958-1995 and the tensile test standard of ASTM D3039. The hand lay up method is used in the manufacture of composites by applying resin to the mold with a roller brush. The compression and tensile tests were carried out using the Gotech Testing Machine (GT 7001 LC 30). The results of the compression test of the palm fiber composite 909.19 Mpa, the tensile test 10.82 Mpa, based on the test results, a comparison was made with the BKI (Indonesian Classification Bureau) standard, it is known that the fiber composite can only meet the minimum standard of compressive strength determined by BKI 100 Mpa, while the value of the tensile strength has not been able to meet the minimum standard specified by BKI 150 Mpa.

Keywords:  Fiberglass, palm fiber composite. compression test


Full Text:

PDF

References


Yulianto, E S. Iskandar, B H. Purwangka, F. 2013. Desain Perahu Fiberglass Bantuan LPPM IPB di Desa Cikahuripan, Kecamatan Cisolok, Sukabumi (Fiberglass Boat Design LPPM IPB Donation in Cikahuripan Village, Cisolok District, Sukabumi). Buletin Psp. 21 (1): 31-50.

Romadhoni dan Nuhasanah. (2017, Oktober). IbM Aplikasi Pembuatan Kapal Nelayan Fibreglass mengunakan Komposit Kain Bekas. Dipresentasikan pada Semnas IIB Darmajaya.

Romadhoni. Pardi. Polaris, N. 2015. The Use Of Composit Materials Alternative Fiberglass (Coco Fibers dan Rags) On Fiberglass Ship In Traditional Shipyards Bengkalis Regency. Jurnal Kapal. 12 (3): 121-132.

Rahman, M.B.N dan Kamiel, B P. 2011. Pengaruh Fraksi Volume Serat terhadap Sifat-sifat Tarik Komposit Diperkuat Unidirectional Serat Tebu dengan Matrik Poliester. Jurnal Ilmiah Semesta Teknika. 14 (2): 133-138.

Mahmuda, E. Savetlana, S. Sugianto. 2013. Pengaruh Panjang Serat Terhadap Kekuatan Tarik Komposit Berpenguat Serat Ijuk Dengan Matrik Epoxy. Jurnal Fema.1 (3): 79-84.

Trisna, H dan Mahyudin, A. 2012. Analisis Sifat Fisis Dan Mekanik Papan Komposit Gipsum Serat Ijuk Dengan Penambahan Boraks (Dinatrium Tetraborat Decahydrate). Jurnal Fisika Unand. 1 (1): 30-36.




DOI: https://doi.org/10.35308/jpt.v8i2.4448

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Muhammad Agam Thahir

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


Jurnal Perikanan Tropis (print ISSN 2355-5564 ;online ISSN 2355-5572), is published by the Faculty of Fisheries and Marine Science Universitas Teuku Umar, Indonesia .
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License