Penambahan Katalik Konverter Plat Tembaga Berbentuk Spiral Terhadap Emisi Gas Buang Motor Bakar Menggunakan Gasboard 5020

Mohammad Daryono, Seno Darmanto

Abstract


Due to the high use of motorized vehicles, air pollution will arise which can interfere with the environment and human health. The results of the combustion of motor vehicle fuels produce pollutants that are harmful to human health, if inhaled by humans, they can cause respiratory tract irritation, eye irritation and skin allergies, which can lead to lung cancer. The purpose of this study was to examine whether copper plates can be used as a substitute for catalytic converters to reduce exhaust gas emissions (CO and HC gases). The test results show that copper plate can be used as a catalytic converter replacement material with a significant reduction in exhaust emissions, with a decrease in the percentage of CO by 29.9% at 5000 rpm using a 10 winding catalyst, and a decrease in the percentage of HC by 33.9% at rotation. 5000 rpm using a 10 winding catalyst. Suggestions from this study are if you use it for daily purposes, you should use a catalyst that has 10 winding.


Full Text:

PDF

References


Erjavec, Jack. 2000. Automotive Tecnology: A system Approach. Cengage Learning

Katara, P. 2016. Review Paper on Catalytic Converter for Automobile Exhaust Emission. Internasional Journal of Science and Reasearch (IJSR). Vol. 5. No. 9: 30-33

Irawan, R. M. B. 2012. Rancang Bangun Cataytic Converter Material Substrat Tembaga Berlapis Mangan untuk Mereduksi Emisi Gas Karbon Monoksida Motor Bensin. LPPM. 409-422. ISBN: 978-602-18809-0-6.

Mokhtar, A., dan T. Wibowo, 2015. Catalytic Converter Jenis Katalis stainless Steel Berbentuk Srang Laba-Laba untuk Mengurangi Emisi Kendaran Bermotor. Seminar Teknologi dan Rekayasa (SENTRA). Vol. 2. 1-6. ISBN: 987-979-796-238-6.

Febriansyah. 2014. Pengaruh Penggantian Main Jet pada Karburator terhadap Konsumsi Bahan Bakar dan Emisi Gas Buang Pada Sepeda Motor Yamaha Jupiter Z. Jurnal Teknik Otomotif Universitas Negeri Padang. Vol. 1. No. 2: 1-8.

Arifin, Z. dan Sukoco. 2009. Pengendalian Polusi Kendaraan. Bandung: Alfabeta.

R. Al-Waked dan M. Behnia, “Enhancing performance of wet cooling towers,” Energy Convers. Manag., vol. 48, no. 10, hal. 2638–2648, 2007, doi: 10.1016/j.enconman.2007.04.018.

A. Hamid, L. Karim, M. Jamroni, I. Qiram, dan G. Rubiono, “Pengaruh Bentuk Dan Konfigurasi Alur Sekat Terhadap Unjuk Kerja Menara Pendingin ( Cooling Tower )” vol. 10, no. November, hal. 1–5, 2017.




DOI: https://doi.org/10.35308/jmkn.v8i2.6414

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.