Analisa Penerapan Keselamatan Dan Kesehatan Kerja pada Pekerjaan Pigging di Pertamina Hulu Rokan

Muthia Anggraini, Irwan Nazif, Fadrizal Lubis

Abstract


PT Pertamina Hulu Rokan routinely performs pigging work. In one of the segments at PT. Pertamina Hulu Rokan 30” CGS 5 – Dumai oil pipeline with a pipe length of 45,500 meters is one of the segments that pigging activities routinely carry out. Based on the phenomena that occur in pigging activities, there are safety risks from physical hazards to the operator, especially from gas pressure in the pipe both during preparation for receiving pigs and taking pigs. The purpose of this study was to find out how the implementation of Occupational Safety and Health in Pigging Work at Pertamina Hulu Rokan based on PP No. 50 of 2012. This research method is in the form of collecting data from interviews with 10 respondents related to work from the lowest level to the supervisor level and collecting data related to job cost analysis. The results of this study are the application of the Occupational Health and Safety Management System (SMK3) on pigging work at 30” CGS 5 - Dumai reaching a value of 95.31% belonging to category number 3, namely the level of control of the implementation of 85-100% including a satisfactory level, as the initial category with the fulfillment of 61 criteria out of a total of 64 criteria and there are 3 criteria that are not met with a value of 4.69% less category. The conclusion of this research is the application of SMK3 in Pertamina Hulu Rokan based on PP no. 52 of 2012 is considered satisfactory

Full Text:

PDF

References


W. Wahyudi, H. B. Santoso, and A. Komari, “Penerapan Manajemen Risiko Guna Mengetahui Tingkat Kecelakaan Kerja Pada Pekerjaan Pigging Di Area Sisi Nubi Total E & P Indonesie,” JURMATIS J. Ilm. Mhs. Tek. Ind., vol. 1, no. 2, p. 66, 2019, doi: 10.30737/jurmatis.v1i2.439.

J. Atmaja, E. Suardi, M. Natalia, Z. Mirani, and M. P. Alpina, “Penerapan Sistem Pengendalian Keselamatan dan Kesehatan Kerja pada Pelaksanaan Proyek Konstruksi di Kota Padang,” J. Ilm. Rekayasa Sipil, vol. 15, no. 2, pp. 64–76, 2018, doi: 10.30630/jirs.15.2.125.

F. Yuliansyah and D. Arneta, “Analisis Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) Pada Proyek Konstruksi (Studi Kasus Proyek Revitalisasi dan Perluasan Depo Kontainer Di PT. Bhanda Ghara Reksa Drive IV Palembang),” Tek. J. Tek., vol. 7, no. 2, pp. 205–215, 2020.

M. Martaningtyas and H. D. Ariesyady, “Identifikasi Bahaya Dan Analisis Risiko Pada Jaringan Pipa Transmisi Crude Oil Di PT.X,” J. Tek. Lingkung., vol. 24, no. 2, pp. 1–14, 2018.

Y. Saraswati, A. Ridwan, and A. Iwan Candra, “Analisis Penerapan Keselamatan Dan Kesehatan Kerja (K3) Pembangunan Gedung Kuliah Bersama Kampus C Unair Surabaya,” J. Manaj. Teknol. Tek. Sipil, vol. 3, no. 2, p. 247, 2020.

S. Ramli, Sistem Manajemen Keselamatan dan Kesehatan Kerja, OHSAS 18001. Jakarta: Dian Rakyat, 2010.

Peraturan Pemerintah Nomor 50 Tahun, Tentang Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3). 2012.

P. N. Sarlinton and S. Pratiwi, Riyanny, “Identifikasi Penerapan K3 Pada Gedung Pemerintah,” Untan, vol. 1, no. 2, pp. 1–4, 2019.

Sugiyono, Metode Penelitian Kuantitatif, Kualitatif dan R&D. Bandung: Alfabeta, 2013.




DOI: https://doi.org/10.35308/jts-utu.v8i2.5148

Refbacks

  • There are currently no refbacks.