ANALISIS LEAN SERVICE UNTUK MENGURANGI WASTE PADA PERUSAHAAN DAERAH AIR MINUM (PDAM) TIRTA MOUNTALA ACEH BESAR

Heri Tri Irawan, Iing Pamungkas, Arhami Arhami

Abstract


Tirta Mountala Regional Water Company (PDAM) is a regional company that has a concentration in the field of water supply. This study aims to implement Lean Service at PDAM Tirta Mountala in an effort to reduce waste in the service of installing new pipe connections. The method used in the study uses Big Picture Mapping and Root cause analysis in finding the causes of waste. The study was conducted in several stages, namely preliminary observations then continued with determining the use of the methods used, collecting data, conducting data processing, analyzing the results of data processing and finally concluding the results of the research, as well as being reviewed from lean service theories, The Waste that occurs is Over Production, Defect, Unnecessary Inventory, Inappropriate Processing, Excessive Transportation, Waiting, Unnecessary Motion. While the critical waste that occurs in the service process is waiting with a weight of 0.36. Waste waiting is caused by mechanical power delay, material repair delay, delay in repairing pipelines passing through public spaces. By knowing the types of waste and critical waste in PDAMs, it is expected to reduce waste and customer satisfaction is fulfilled.


Keywords


Lean Service; waste; PDAM

Full Text:

PDF

References


Harliwantip, 2014, Analisa Lean Service Guna Mengurangi Waste Pada Perusahaan Daerah Air Minum Banyuwangi, Jurnal Teknik Industri, Vol.12, No.1, Universitas 17 Agustus Banyuwangi.

Hicks, B.J. 2007, Lean Information Management : Understanding and Eliminating Waste, International Journal of Information Management 27, hal. 233-249.

Piercy, N. and Rich, N. (2009), Lean Transformation in the pure service environment :the case of the call service centre, International journal of Operations and Production Management 29, hal. 54-76.

Alpasa, Fijar dan Fitria, Lisye, 2014, Penerapan Konsep Lean Service Dan Dmaic Untuuk Mengurangi Waktu Tunggu Pelayanan. Jurnal Teknik Industri No.03, Vol.02, Institut Teknologi Nasional (Itenas) Bandung.

Fauzi, Zaenal. 2011. Implementasi Lean Manufacturing Untuk Peningkatan Produktivitas. (Studi Kasus Pada PT. Ekamas Fortuna Malang). Tesis Program Magister Manajemen Teknologi. ITS Surabaya.

Ferdinand, Augusty, 2010, Metode Penelitian Manajemen, Edisi Kedua, Semarang Penerbit: Universitas Diponegoro.

Gaspersz, Vincent, 2007. Lean Six Sigma For Manufacturing and Service Industries. PT. Gramedia Pustaka Utama. Jakarta.

Luthfi, Ahcmad dan Irawan, Hery. 2012. Analisis Risiko Rantai Pasok Dengan Model House Of Risk. Jurnal Manajemen. Vol. 12 No. 1

Putranto, J. H, 2007. Penerapan Metode Lean Untuk Mengurangi Pemborosan Pada Proses Produksi Cottugated Carton Box PT. SRC. Tesis Magister Management Teknologi Sepuluh November. Surabaya.

Trisnal, dkk, 2013, Analisis Implementasi Lean Manufacturing Dengan Lean Assessment Dan Root Cause Analysis Pada PT. XYZ, Jurnal Teknik Industri, Vol.3, No.3, Universitas Sumatera Utara.

Waluyo, Minto, 2013, Kajian Waste Pada Produksi Benang Dengan Pendekatan Lean Manufacturing Di PT. XYZ Surabaya. Jurnal Teknik Industri, Universitas Pembangunan Nasional “Veteran” Jawa Timur.




DOI: https://doi.org/10.35308/jopt.v4i2.1498

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Jurnal Optimalisasi



JOPT: Jurnal Optimalisasi Indexing and Abstracting by: