PENERAPAN METODE SIX SIGMA (DMAIC) PADA UMKM KERUDUNG DI DESA SUKOWATI BUNGAH GRESIK

Sofiyanurriyanti Sofiyanurriyanti, Mahasin Maulana Ahmad

Abstract


Quality Control is very important in efforts to minimize the number of defective products. One of them is in small and medium businesses in the Kerudung Micro Small And Medium Enterprises in Sukowati Bungah Village, Gresik District, Gresik Regency. This Micro Small And Medium Enterprises owned by Ms. Hj difficultiawati. The purpose of this research is to analyze the defects of veil products by using the Six Sigma method namely DMAIC (Define, Measure, Analuze, Improve, Control). The results of this study indicate that the company has a total number of disability veils of 225 units consisting of untidy edge trimming, creased fabric, holes in the veil fabric, less neat screen printing, inappropriate colors. In the process of making this veil there is a value of the damage ratio on goods by calculating the upper control limit (UCL) of 134.9761 and the Lower Control Limit (LCL) of 73.6899 and the average damage to the CL veil of 104.3333 currently at level 1 sigma so that improvements need to be made to achieve level 6 sigma. Using the Pareto diagram tool and for quality improvement improvements were made to the veil disability with SIPOC (Supplier, Input, Process, Output, Customer).


Keywords


Six Sigma; DMAIC; Diagram Pareto; Fishbone; SIPOC

Full Text:

PDF

References


Antony, J., 2008. Can Six Sigma Be Effectively Implemented in SMEs?. International Journal of Productivity and Performance Management, 57(5), 420-423.

Artham, P., dan Rojamarowan, N., 2013, Defective Reduction on Dent Defects in Flexible Printed Cicuits Manufacturing Process. IOSR Journal Of Engineering. 2(5), 23-28.

Badan Pusat Statistik (BPS), diakses dari http://www.bps.go.id/, diakses pada tanggal 9 Juni 2017 pada jam 13.00 WIB.

Biegel, John E., (1999), Production Control, New York Prentice-Hall. Inc

Caesaron, D. dan Simatupang,S.Y. 2015. Implementasi Pendekatan DMAIC Untuk Perbaikan Proses Produksi Pipa PVC (Studi Kasus PT. Rusli Vinilon). Journal Metris. No 16, hal 91-96, ISSN:1411-3287.

Collis, D.J., dan Montgomery, C.A. (2005). Corporate Strategy A ResourceBased Approach, 2nd Edition. McGraw Hill, New York.Harry, M.J., and Schroeder, R., 2000, Six Sigma :The Breakthrough Management Strategy Revolutionizing The World’s Top Corporation , Doubleday, New York.

Gaspersz, V., 2008. Total Quality Management. Jakarta: PT. Gramedia Pustaka Umum.

Ginting, Rosnani. (2007). Sistem Produksi. Graha Ilmu: Yogyakarta.

Hanke, J. E. & Wichers, D. W. (2005). Business Forecasting Eight Edition. New Jersey: Pearson Prentice hallKalekar, Prajakta S. (2004).

Heizer, Jay & Render Barry. 2015. Manajemen Operasi : Manajemen Keberlangsungan dan Rantai Pasokan, edisi11.Jakarta: Salemba Empat.

Mehrjerdi, Y.Z., 2010, Quality Function Deployment and Its Extensions, International Journal of Quality & Reliability Management, 27(6), 616-640.

Nasution, Arman Hakim.(2003). Perencanaan dan Pengendalian Produksi edisi pertama cetakan kedua.Guna Widya, Surabaya.

Nasution, A. H., dan Prasetyawan, Y. (2008).Perencanaan & Pengendalian Produksi. Edisi Pertama. Graha Ilmu, Yogyakarta.

Pusporini, P., Andesta, D., (2009). Integrasi Model Lean Sigma Untuk Peningkatan Kualitas Produk. Jurnal Teknik Industri, Vol. 10,No.2: 91-97.

Vanany, I. dan Emilasari, D.,( 2007). Aplikasi Six Sigma pada Produk Clear File di Perusahaan Stationary. Jurnal Teknik Industri, Vol. 9 No. 1,: 27-36.

Reinke, P.C., 2010. The New Brass Ring: Dmadd, Process Improvement for the 21st Century. USA: Eloquent Books.

Stevenson, J., William danChuong, Chee., Sum. Manajemen Operasi. Buku 2.Edisi 9.SalembaEmpat.2011.

Taylor III, B.W., 2005. Sains Manajemen 8th ed., Surabaya: Salemba Empat.Heizer, Jay and Barry Render. (2001). Operations Management, 6thedition, Prentice-Hall Inc, New Jersey.




DOI: https://doi.org/10.35308/jopt.v5i2.1471

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Jurnal Optimalisasi



JOPT: Jurnal Optimalisasi Indexing and Abstracting by: