Analisis Biaya Kehilangan (LOSS COST) DARI Produk Air Minum dalam Kemasan (AMDK) Menggunakan Metode Poka Yoke

Syarifuddin Syarifuddin, Diana Khairani Sofyan

Abstract


Quality is a common cause is natural to unite the functions of the business. One of the tools for quality improvement is Poka Yoke method. Poka Yoke is a technique to overcome and avoid simple mistakes that caused by humans or workers at the workplace. PT. Ima Montaz Sejahtera is one of the companies engaged in the production of bottled water (bottled water). Bottling line is a unit of production machinery which produces aqua medium 550 ml and large 1,500 ml consisting of three (3) main unit that is a bottle washing station, a water filling and a closure cap (capper). The problem that arises is the frequent occurrence of broken bottles and cups during the production of this may raise the cost of loss (loss cost) so as to reduce the profitability of the company. Based on these descriptions, it is necessary to observations oriented analysis (lost cost) in 550 ml of medium aqua products. Completion method to be used is the method of poka yoke. The results showed that the total lost cost products aqua medium 550 ml (September to August 2016) was 247,052,000, - where reject that occurred during the production process takes place is in the bottle and cap the cost of a bottle / unit amounted to Rp 1,200 and cap / unit Rp 80.The cost of damages from defective products is Rp 42,330,000, - with the cost of damages from defective cup is Rp 3,757,920, - bringing the total loss of Rp 46,087,920, -. In addition, the problem often occurs in capper unit wherein the corrective actions taken by the operator resulting in productivity stalled, problems that often occur is head capper unstable. The analysis showed that the largest percentage of the causes of errors often occur on the head capper unstable, operator of the less scrupulous and not focused when the production takes place, method of adjustment the capper unit that is not accurate and does not exactly head and chief bottle when fitting lid and the Inverter on a different machine.

Keywords: Quality, Poka Yoke, Bottled water


Full Text:

PDF

References


Aishwarya. 2015. International Journal Of Engineering Sciences & Research Technology Review on “poka-yoke: technique to prevent defects”, Volume: 04 Issue: 02 Feb 2015, http://www.ijret.org, Department of Mechanical Engineering, KIT’s College of Engineering, Kolhapur, Maharashtra, India.

Dave, Yash. 2015. Implementation of poka yokeTechnique in a gear industry. A case Study International Journal of Latest Research in Science and Technology ISSN (Online): 2278-5299. Volume 4, Issue 3: Page No.32-33, May-June 2015, http://www.mnkjournals.com/ijlrst.ht, ISSN:2278-5299 32, India.

Jiwa. 2011. Pengertian Product Liability. http://jenggoten.blogspot.com/2009/10/pengertian-product-liability.html, [5 November 2011].

Gaspersz, Vincent. 2001. Metode Analisis Untuk Peningkatan Kualitas. Jakarta: PT Gramedia Pustaka Utama.

Juran, J.M. 1998. Juran’s Quality Control Handbook Fourth Edition. USA: McGraw-Hill Book Company.

Kholik, Heri M. 2008. Aplikasi DMAIC Dalam Metode Six Sigma dan Eksperimen Shainin Bhote sebagai Penurunan Persentase Cacat. Jurnal Teknik. Industri, Vol. 9, No. 2, Agustus 2008: 117-127, Mercubuana, http://qualityengineering.wordpress.com/tag/design-of-experiment.

Pratik D, et All. 2015. Poka Yoke Implimentation On Punching Machine: A Case Study. Volume: 04 Issue: 02 | Feb-2015, http://www.ijret.org, Department of Mechanical Engineering, KIT’s College of Engineering, Kolhapur, Maharashtra, India.

Salam, Abdul. 2008. Cacat Tersembunyi (Latent-defect). http://staff.blog.ui.ac.id/abdul.salam/2008/07/17/cacat-tersembunyi-latent-defect/.html, [5 November 2011].

S.P., R. Phenter dan Safa, Faisal. 2004, Identifikasi dan Simulasi Faktor Penyebab Cacat Produk Botol Kontainer dengan Metode Six Sigma Pada PT Indovasi Plastik Lestari. Industrial and Systems Engineering Assessment Journal (INASEA), Volume 5: 98-115. ISSN:1411-9129. Binus University, Alam Sutera, Tangerang, Jawa Barat.

Windarti, Tantri. 2014. Pengendalian kualitas untuk meminimasi produk cacat pada proses produksi besi beton. Jurnal Teknik Industri, Program Studi Teknik Industri, Fakultas Teknik-Universitas Diponegoro Tembalang Semarang.




DOI: https://doi.org/10.35308/jopt.v2i3.209

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal Optimalisasi



JOPT: Jurnal Optimalisasi Indexing and Abstracting by: