Perancangan Tata Letak Parkiran Rumah Sakit XYZ Menggunakan Metode Craft

Vertikal Willis, Steven Steven, Anita Christine Sembiring

Abstract


Motorcycle parking is an important facility, especially in hospitals. However, motorbike parking facilities are often neglected and tend to be built improperly, as a result, the parking facilities are poor and uncomfortable to use. This study focuses on the largest hospital in Medan. Motorcycle parking at this hospital is used as parking for PT.ABC employees and hospital visitors. This hospital parking lot is located in the basement and consists of only one narrow lane used for entrance and came out simultaneously. The impact of this parking lane is to cause long queues, especially during busy hours such as office hours. The second problem is, the parking lot is quite far from the entrance to the PT.ABC office and the entrance to the hospital so that it makes users walk further from the parking lot to their destination. The results of this study were to redesign the Layout of the motorcycle parking lot by applying the parking guidelines of the directorate general of land transportation and using the Craft method to increase the efficiency of the user's distance.


Keywords


Layout Improvements; Facility Layout; Parking Characteristics; Craft Methods

Full Text:

PDF

References


Merry, S., 2017, Rancang Ulang Tata Letak CV.Sumber Vulkanisir Super Menggunakan Metode Konvensional dan CRAFT, Jurnal Sains,Teknologi dan Industri, vol 14,hal 74-84.

Evi, F., Bobby, K., Bagya, A.,2017, Usulan Perancangan Layout Perkantoran Menggunakan Metode Craft di PT.XYZ, Jurnal Teknik Industri, hal 148-154.

Hesti, M., Achmad, D.,2015, Evaluasi Tata Letak Fasilitas Produksi Untuk Meningkatkan Efisiensi Kerja Pada PT.Nusa Multi Laksana, Jurnal Ilminah Manajemen dan Bisnis, vol 1,hal 1-8.

Marni, A., Eko, P., Agus, T., 2017, Analisis Tata Letak Fasilitas Dengan Menggunakan Metode Activity Relationship Chart Pada Industri Mebel Bambu Karya Manunggal Yogyakarta, Jurnal Teknik Industri, vol 3,hal 2-3.

Lina, Y.,Evi, F., Lely, H., 2015, Usulan Perbaikan Tata Letak Gudang dengan Menggunakan Metode CRAFT (Studi Kasus di Gudang K-Store, Krakatau Junction), Jurnal Informasi dan Teknologi,hal 3-5.

Theresia, S.,Kristoforus, J., Dominikus, I., Surianto, Ivana, Z., 2020, Usulan Perbaikan Tata Letak Fasilitas Produksi Kursi Roda Dengan Craft, Jurnal Informasi dan Teknologi, vol 19, hal 17-20.

Rian, O.,Harits, N., Chaznin, R., 2020, Perencanaan Tata Letak Fasilitas Produksi Menggunakan Pendekatan Kuantitatif Dengan Metode Algoritma Craft, Jurnal Teknik Industri, vol 3, hal 319-324.

Rachel, Y., Sriyanto, 2016, Usulan Perbaikan Tata Letak Lantai Produksi Departemen Upholstery Perusahaan Mebel Menggunakan Algoritma Craft dengan Minimasi Ongkos Material Handling, Jurnal Teknik Industri, hal 3-5.

Agung, A., Diana, A.,2019, Usulan Perancangan Tata Letak Fasilitas Lantai Produksi Menggunakan Algoritman Craft di Pabrik Alumunium Super (Cap Komodo), Jurnal Teknik Industri, hal 48-50.

Suharto, T.,Syukriah,Sayed, B., 2015, Usulan Perbaikan Tata Letak Fasilitas Dengan Menggunakan Algoritma Craft, Jurnal Teknik Industri, vol 4, hal 36-41 .

Bernadus, T.,Slamet, S., 2015, Perancangan Tata Letak Fasilitas Produksi PT.Mitra Presisi Plastindo, Jurnal Teknik Industri, hal 187-191

Angki, E., 2018, Perancangan Ulang Tata Letak Fasilitas Produksi CV. Daya Mandiri Pontianak Menggunakan Metode Systematic Layout Planning and Craft, Jurnal Teknik Industri, hal 30-34.




DOI: https://doi.org/10.35308/jopt.v6i2.2505

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Jurnal Optimalisasi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

JOPT: Jurnal Optimalisasi Indexing and Abstracting by: