Analisis Postur Kerja Operator Menggunakan Metode Rapid Entire Body Assesment (REBA) di Stasiun Pengisian Tawas PDAM Tirta Meulaboh
Abstract
This study aimed to analyze the operator's work posture using the Rapid Entire Body Assessment (REBA) method and to determine the level of risk of Musculoskeletal Disorders (MsDs) on the alum filling station operator at PDAM Tirta Meulaboh. Based on the observations made on the operator's activities while working, the operator fills the alum with a bent body position, uses a shovel and lifts it and is done repeatedly. This research is a quantitative descriptive study, with direct observation of the process of filling alum. Data collection is done by taking photos of the operator's activities while doing his job, then determining the angle of the operator's body using the Rapid Entire Body Assessment (REBA) method. The conclusions is that the operator's working posture with REBA method gets a score for element I with a score of 6, element II with a score of 8, and element III with a score of 7 and the level of risk through Action Level. REBA score element I final score (4-7) moderate risk category with required action, element II final score (8-10) high risk category with urgent action required, and element III final score (4-7) moderate risk category with required action.
Keywords
Full Text:
PDFReferences
Kasjono, H.S., Yamtana., Pandini, D.I. Faktor Risiko Manual Handling dengan Keluhan Nyeri Punggung Bawah Pembuat Batu Bata. Jurnal Kesehatan. Vol 8 no. 2, pp 202-211. Agustus 2017.
Susihono, W & W. Prasetyo. Perbaikan Postur Kerja Untuk Mengurangi Keluhan Muskuloskeletal Dengan Pendekatan Metode OWAS (Studi kasus di UD. Rizki Ragil Jaya–Kota Cilegon). Spektrum Industri. Vol 10, no. 1,pp-107. April 2012.
Middlesworth, M. A Step-by-Step Guide: Rapid Entire Body Assessment (REBA), Indiana: Ergonomics Plus. 2013.
Susihono, W., & Rubiati, E., 2013, Perbaikan Metode Kerja Berdasar Rapid Upper Limb Assessment (RULA) pada Perusahaan Konstruksi dan Fabrikasi, Spektrum Industri, vol 11, no 1. April 2013
Andrian & Deni. (2013). Pengukuran Tingkat Resiko Ergonomi Secara Biomekanika Pada Pekerja Pengangkutan Semen (Studi Kasus: PT. Semen Baturaja). Palembang: Laporan Kerja Praktek Fakultas Teknik Universitas Binadarma
Purba, I. G., & Lestari, M. Faktor Risiko Keluhan Musculoskeletal Disorders (Msds) Pada Aktivitas Pengangkutan Beras Di PT Buyung Poetra Pangan Pegayut Ogan Ilir. Jurnal Ilmu Kesehatan Masyarakat, 8(2). Pp 125-134 Juli 2017
Istighfaniar, K., Mulyono. Evaluasi Postur Kerja dan Keluhan Muskoloskeletal pada Pekerja Instalasi Farmasi. The Indonesian Journal of Occupational Safetyand Health; Vol 5, no. 1, pp. 81–90. Januari 2016.
Wahyuniardi, R., Reyhanandar, D.M. Penilaian Postur Operator Dan Perbaikan Sistem Kerja Dengan Metode Rula dan Reba (Studi Kasus). J@ti Undip: Jurnal Teknik Industri; vol 13, no. 1, pp. 45-50. Maret 2018.
Setiorini, A., Musyarofah, S., Mushidah, Widjasena, B. Analisis Postur Kerja Dengan Metode Reba dan Gambaran Keluhan Subjektif Musculoskeletal Disorders (MSDs) (Pada Pekerja Sentra Industri Tas Kendal. Jurnal Kesehatan; Edisi Khusus (1), pp. 24-32. Februari 2019.
Sulaiman, F. dan Yossi P. S. Analisis Postur Kerja Pengasahan Batu Akik Dengan Menggunakan Metode REBA. Jurnal Teknovasi. Vol 3. No. 1. Pp. 16-25 April 2016.
Sang A. Hubungan Risiko Postur Kerja Dengan Keluhan Musculoskeletal Disorders (Msds) Pada Pemanen Kelapa Sawit Di Pt. Sinergi Perkebunan Nusantara Relation Working Posture Risk With Musculoskeletal Disorders (Msds) Complaints Of Palm Harvester In Pt. Sinergi Perkebunan Nusantara. Skripsi. Kesehatan dan Keselamatan Kerja Fakultas Kesehatan Masyarakat UNHAS, Makassar. 2014
Setyanto, N. W. ‘Ergonomics analysis in the scarfing process by owas, nios and nordic body map’ s method at slab steel plant’ s division’, international Journal of Innovative Research in Science, Engineering and Technology. Vol 4 no. 3, 1086–1093. Maret 2015.
International Labour Organization (ILO). 2013. The Prevention of Occupational Disease. Geneva; International Labour Organization.
Prayitno, S., Hanum, B. Analisa Postur Kerja Dengan Metode Rula Pada Operator Proses Masking FR Dan RR D30D Di PT SC Plant 2. Jurnal PASTI. Vol 12 No. 1, pp. 79 – 92. April 2018.
Sofiyanurriyanti, Sofiyanurriyanti, Agus Ardiyansyah, and Cut Apriani Rahayu. "Analisis Postur Kerja Operator pada Area Pengantongan Pupuk Mengunakan Metode OWAS di PT. Pupuk Iskandar Muda." Jurnal Optimalisasi 6.1 (2020): 77-85.
Fitriadi, Fitriadi, Gaustama Putra, and Avina Avina. "Perancangan Fasilitas Kerja pada Operator Menggunakan Metode SNQ dan REBA dengan Software Ergofellow." Jurnal Optimalisasi 7.2 (2021): 249-259.
Hidjrawan, Yusi, and Aman Sobari. "Analisis Postur Kerja Pada Stasiun Sterilizer Dengan Menggunakan Metode OWAS dan REBA." Jurnal Optimalisasi 4.1 (2019): 1-10.
Joanda dan Suhardi. Analisis Postur Kerja dengan Metode REBA untuk Mengurangi Resiko Cedera pada Operator Mesin Binding di PT. Solo Murni Boyolali. Proseding Seminar dan Konferensi Nasional IDEC. Pp.76-76. 8-9 Mei 2017.
DOI: https://doi.org/10.35308/jopt.v8i1.5332
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 Jurnal Optimalisasi
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
JOPT: Jurnal Optimalisasi Indexing and Abstracting by:
P-ISSN: 2477-5738 I E-ISSN: 2502-0528 I DOI: 10.35308
Jurusan Teknik Industri, Fakultas Teknik, Jl. Alue Peunyareng, Kampus UTU, Meureubo, Kabupaten Aceh Barat, Aceh 23615, Indonesia, Email:jopt@utu.ac.id
is licensed under a Attribution 4.0 International License