Pengendalian Risiko Kecelakaan Kerja Menggunakan Metode Job Sefety Analysis Pada Pekerjaan Glass Cleaning Di PT. KSO APS ISS

Aod Abdul Jawad, Agus Nurrokhman

Abstract


The KSO APS ISS company is one of the cleaning companies in Indonesia which is located in the Tangerang Banten area. In carrying out its work cycle operations, it uses a lot of chemicals, heavy level machines and potentially dangerous B3 materials. During work there are various potential and risk factors that cause work accidents and work-related illnesses. Company performance, especially in terms of work productivity, is often disrupted as a result of ignoring occupational safety and health rules in carrying out work. The aim of this research is to find out what factors cause work accidents and how to prevent or control risks in Glass Cleaning work in order to reduce the occurrence of work accidents. This research uses the Job Safety Analysis method. The Job Safety Analysis method is a way to look at work techniques and find dangers from the design of machines, equipment, materials, climate and work processes needed by workers to do their work. The research design used is qualitative which is used to describe explanations related to hazard identification, risk evaluation and risk control in glass cleaning work. The results of research using the JSA identification method contained no extreme and high risk jobs, 3 medium risk jobs and 5 low risk jobs.


Keywords


K3; Job Safety Analysis; HIRADC; Glass Cleaning

Full Text:

PDF

References


C. Suhartoko and I. Mas’ud, “Implementasi K3 Dalam Meningkatkan Produktivitas Kerja Dengan Pendekatan Fault Tree Analysis Di PT. SA,” Juritek, vol. Vol 1 No., no. P-ISSN : 2809-0802, pp. 115–125, 2021.

I. Rahmanto and M. I. Hamdy, “Analisa Resiko Kecelakaan Kerja Karawang Menggunakan Metode Hazard and Operability (HAZOP) di PT PJB Services PLTU Tembilahan,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. 2, pp. 53–60, 2022.

U. F. Huda, A. Sukmawati, and I. M. Sumertajaya, “Model Perilaku Keselamatan Kerja Karyawan pada Industri Berisiko Tinggi,” J. Manaj. Teknol., vol. 15, no. 1, pp. 51–66, 2016, doi: 10.12695/jmt.2016.15.1.4.

S. Sari, A. Puspita, T. Sulistiyo, M. A. Faruq, and R. Bimantyo, “Analisis Potensi Bahaya Serta Rekomendasi Perbaikan Dengan Metode HAZOP Dan 5S (Studi Kasus: Percetakan PT. XYZ),” MATRIX J. Manaj. Tek. Ind. - Produksi, vol. 22, no. 2, pp. 139–148, 2022, doi: 10.350587/Matrik v22i2.3070.

ILO, “Keselamatan dan Kesehatan Kerja di Tempat Kerja Sarana untuk Produktivitas,” in Clinics in Laboratory Medicine, vol. 33, no. 1, ILO, 2013, pp. 125–137.

S. Bastuti, “Analisis Risiko Kecelakaan Kerja Dengan Metode Failure Mode and Effect Analysis (Fmea) Dan Fault Tree Analysis (Fta) Untuk Menurunkan Tingkat Risiko Kecelakaan Kerja (Pt. Berkah Mirza Insani),” J. Ilm. dan Teknol., vol. 2, no. 1, pp. 48–52, 2020.

R. Hidayatullah and I. M. Muliatna, “Study Failure Mode and Effects Analysis (Fmea) Sebagai Identifikasi Bahaya Dan Upaya Pencegahan Kecelakaan Kerja Di Pt. Pjb …,” vol. 06, pp. 116–123, 2018.

I. Asih, I. Setiawan, H. Hernadewita, and H. Hendra, “Effects of ergonomics intervention on work accidents in the construction sector and their effect on productivity,” J. Sist. dan Manaj. Ind., vol. 6, no. 1, pp. 45–55, 2022, doi: 10.30656/jsmi.v6i1.4242.

I. W. G. E. Triswandana and N. K. Armaeni, “Penilaian Risiko K3 Konstruksi Dengan Metode HIRARC,” Ukarst Univ. Kadiri Ris. Tek. Sipil, vol. 4, no. 1, pp. 96–108, 2020, doi: 10.30737/ukarst.v3i2.

KSO, “Laporan Data KSO APS ISS tahun 2022,” Tangerang, 2022.

D. R. Sitompul and D. Kartikasari, “Analisis Penerapan Dan Usulan Perbaikan Sistem Manajemen Keselamatan Dan Kesehatan Kerja Di Pt Etowa Packaging Indonesia,” J. Appl. Bus. Adm., vol. 2, no. 2, pp. 166–173, 2018, doi: 10.30871/jaba.v2i2.632.

P. A. D. Juliarti, A. A. P. Agung, and I. N. Sudja, “Effect of Compensation and Work Environment on Employee Performance with Employee Job Satisfaction as an Intervening Variable,” Int. J. Contemp. Res. Rev., vol. 9, no. 3, pp. 20553–20562, 2018, doi: 10.15520/ijcrr/2018/9/03/460.

A. Ahmad, M. Agustin, and A. Khairunnisa, “Penerapan Manajemen Proyek Untuk Pembangunan Kilang Minyak Dengan Menggunakan Metode PERT (Program Evaluation And Review Technique) di PT. XYZ,” J. Kalibr. - Karya Lintas Ilmu Bid. Rekayasa Arsitektur, Sipil, Ind., vol. 4, no. 1, pp. 1–18, 2021, doi: 10.37721/kalibrasi.v4i1.776.

D. A. Lestari, S. R. Rizalmi, and N. O. Setiowati, “Identifikasi Risiko Kecelakaan Kerja Menggunakan Metode Job Safety Analysis (JSA) pada Rumah Produksi Tahu,” G-Tech J. Teknol. Terap., vol. 7, no. 4, pp. 1335–1344, 2023, doi: 10.33379/gtech.v7i4.3074.

M. D. Pratama Rahman, E. D. Priyana, and A. W. Rizqi, “Job Safety Analysis (JSA) Sebagai Upaya Pengendalian Resiko Kecelakaan Kerja Pada Pekerjaan Fabrication Dd PT. Wilmar Nabati Indonesia,” Tek. Sains J. Ilmu Tek., vol. 7, no. 2, pp. 98–109, 2022, doi: 10.24967/teksis.v7i2.1947.

P. Radite and F. Fahma, “Implementasi Metode Job Safety Analysis dan Risk Assessment di Gudang Bahan Baku PT. XYZ, tbk.,” in Prosiding seminar nasional industrial engineering conference, 2015, no. 2010, pp. 137–142.

A. Levi, “Usulan Perbaikan Keselamatan Kerja Menggunakan Metode Job Safety Analysis (Jsa) Dan Failure Mode and Effect Analysis (Fmea),” Spektrum Ind., vol. 15, no. 2, p. 151, 2017, doi: 10.12928/si.v15i2.7549.

N. L. H. Arifah and I. M. Muliatna, “Pengaruh Penerapan Keselamatan Dan Kesehatan Kerja (K3) Terhadap Tingkat Produktivitas Kerja Karyawan Bagian Service Kendaraan Di PT. Mayangsari Belian Motors Sidoarjo,” J. Pendidik. Tek. Mesin, vol. 8, no. 2, pp. 68–75, 2019.

Sugiyono, Metode Penelitian Kuantitatif, Kualitatif dan R&D, Pertama. Jakarta: ALFABETA, 2017.




DOI: https://doi.org/10.35308/jopt.v10i01.9209

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Optimalisasi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

JOPT: Jurnal Optimalisasi Indexing and Abstracting by: