Analisis Produktivitas pada Pengolahan Ikan Tuna Cube di PT. Aceh Lampulo Jaya Bahari

Abdiel Khaleil Akmal, Arrazy Elba Ridha, Khairul Hadi

Abstract


PT. Aceh Lampulo Jaya Bahari is a nautical product manufacturer based in the Lampulo fishing port, Banda Aceh, Indonesia. Productivity is a comparison of input and output that indicates how effectively resources are managed and exploited to obtain the best results. High production means there is less likelihood of delays. PT. Aceh Lampulo Jaya Bahari's productivity achievement indicator values fluctuate annually, with some years seeing low or high production.  The purpose of this study is to identify productivity-influencing elements, as well as to estimate the level of labor productivity, production amount, total productivity, and the difference in production amount when processing tuna cubes at PT. Aceh Lampulo Jaya Bahari. This study examines monthly production data from 2023 to determine worker productivity and output. The method is to measure partial and total productivity and then launch monthly productivity changes. The study's findings demonstrate that labor productivity and tuna cube output are higher than number one, indicating productive performance. PT. Aceh Lampulo Jaya Bahari met its production objective of 350 kg per month, with an average total labour productivity of 2.6%. This study advises that firms maintain production consistency and form a network of collaborating partners to ensure raw material availability.


Keywords


Productivity; Tuna Cube Processing; Labor; Productivity Evaluation

Full Text:

PDF

References


Assauri, Sofyan. 2008. Manajemen Produksi dan Operasi. Jakarta: Universitas Indonesia

Amien Silalahi, Gabriel Metodologi Penelitian dan Studi Kasus (Sidoarjo:CV. Citramedia 2003).

Corder, Anthony. 1992. Teknik Manajemen Pemeliharaan, ter, K. Hadi. Jakarta: Erlangga.

Dyadem. 2009. Guidelines for Failure Mode and Effects Analysisfor Automotive, Aerospace and General Manufacturing Industries. New York washington D.C: CRC Press.

Hartomo, A. J.;Widiatmoko, M. C. 1994. Teknologi Membran Pemurnian Air. Edisi 1 Yogyakarta.

McDermott, R.E., et al. 2009. The Basics of FMEA. New York: CRC Press. Manzini, R. 2010. Maintenance for Industrial Systems. London: Springer.

Persat, A. 2020. Identifikasi Penyebab Kerusakan dengan Pendekatan Failure Mode and Effect Analysis. Journal of industrial and manufacture engineering, 4(2), 132-13

Puspitasari, N., A., dan A., Martanto. 2014. Penggunaan Fmea Dalam Mengidentifikasi Resiko Kegagalan Proses Produksi Sarung ATM (Alat Tenun Mesin) (Studi Kasus PT. Asaputex Jaya Tegal). J@TI Undip. Vol IX, No. 2, hal. 93-98.

Putra, Y. C. (2019). PerBaikan Durasi Overhaul Desalination Plant PLTGU Di PT. PJB UP Gresik Dengan Pendekatan Metode Lean Six Sigma (Doctoral dissertation, Institut Teknologi Sepuluh Nopember).

Santoso, R., dkk., 2021. Optimalisasi Perawatan Mesin Press Dengan Metode Failure Mode Effect Analysis (FMEA). JamBura Industrial Review.Volume 1, Nomor 1, hal. 1-6

Sandhy, T. A. (2018). Evaluasi Performa Unit Desalinasi 24 tingkat kapasitas 90 Ton/Jam (Doctoral dissertation, Sepuluh Nopember Institute of Technologi).

Stamatis, D. H., 1995. Failure Mode and Effect Analysis FMEA from Theory to Execution. Wisconsin: ASQC Quality Press.

Suriasumantri. Jujun S., 2001, Filsafat Ilmu: Sebuah Pengantar Populer, Pustaka Sinar Harapan, Jakarta.

Yumaida. 2011. Analisis Risiko Kegagalan Pemeliharaan Pada Pabrik Pengolahan Pupuk Npk Granular (Studi Kasus: PT. Pupuk Kujang Cikampek) (Skripsi). Depok: Universitas Indonesia.

Gaspersz, Vincent. 1998. Manajemen Produktivitas Total, Strategi Peningkatan Produktivitas Bisnis Global. Jakarta: Gramedia.




DOI: https://doi.org/10.35308/jopt.v10i1.9531

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Optimalisasi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

JOPT: Jurnal Optimalisasi Indexing and Abstracting by: