Analisis Perawatan Mesin Cetak Offset Heidelberg dengan Metode Total Productive Maintenance

Yusnia Sinambela

Abstract


PT. X is a company that is engaged in printing, the high order requires the company to maintain production machines so that consumer orders can be sent according to the specified time. This company is inseparable from the problem of the effectiveness of the printing machine, because this machine is the company's main machine and improper handling and maintenance of the machine will result in losses. Therefore we need effective and efficient steps in machine maintenance to overcome and prevent these problems. This study discusses maintenance performance by taking into account the value of Mean Time Beetwen Failure (MTBF), Mean Time To Repair (MTTR), and machine availability, using data from May 2019 to April 2020 to find out information about the actual state of the maintenance system, whether good or bad. Based on the results of MTBF data processing, it is concluded that the reliability of the machine is not stable, the MTTR graph is stable, which means that the ability (skill) of the maintenance operator is good and the machine availability needs to be improved.

Keywords


Total Productive Maintenance; Mean Time Beetwen Failure; Mean Time To Repair; Availability

Full Text:

PDF

References


D. F. Rahmadhani, H. Taroepratjeka, and L. Fitria, “Usulan Peningkatan Efektivitas Mesin Cetak Manual Menggunakan Metode Overall Equipment Effectiveness (OEE) (Studi Kasus Di Perusahaan Kerupuk TTN),” J. Online Inst. Teknol. Nas., vol. 2, no. 4, pp. 156–165, 2014.

Herwindo, A. Rahman, and R. Yuniarti, “Pengukuran Overall Equipment Effectiveness (OEE) Sebagai Upaya Meningkatkan Nilai Efektivitas Mesin Carding (Studi Kasus : PT. XYZ),” Rekayasa Manaj. Sist. Ind., vol. 2, no. 5, pp. 919–928, 2013.

N. C. Dewi and D. I. Rinawati, “Analisis Penerapan Total Productive Maintenance (Tpm) dengan Perhitungan Overall Equipment Efectiveness (Oee) dan Six Big Losses Mesin Cavitec PT. Essentra Surabaya (Studi Kasus PT. Essentra),” None, vol. 4, no. 4, 2015.

M. Mulyadi, Penelitian Kuantitatif Dan Kualitatif Serta Pemikiran Dasar Menggabungkannya, vol. 15, no. 1. 2013.

J. M. T. Haryono, “Implementasi Total Productive Maintenance Sebagai Penunjang Produktivitas Dengan Pengukuran Overall Equipment Effectiveness Pada Mesin Rotary Kth-8 ( Studi Kasus Pt . Indonesian Tobacco ) The Implementation Of Total Productive Maintenancetheory To Increas,” vol. 8, pp. 75–84, 2012.

J. Venkatesh, “An Introduction to Total Productive Maintenance ( TPM ),” plant Maint. Resour. Cent., pp. 3–20, 2007.

A. Rahman, “Total Productive Maintenance pada Mesin Cetak Offset Printing SM 102 ZP (Study Kasus di PT. XYZ),” STRING (Satuan Tulisan Ris. dan Inov. Teknol., vol. 4, no. 1, p. 48, 2019, doi: 10.30998/string.v4i1.3614.

T. Mesra, “Pengukuran Efektivitas Mesin Cetak Web Offset Goss Community Menggunakan Overall Equipment,” vol. 3814, no. 2016, pp. 169–176, 2017.

M. Siddiq, F. T. D. Atmaji, and J. Alhilman, “Usulan Penerapan Total Productive Maintenance (TPM) untuk Meningkatkan Efektivitas Mesin dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) pada Plant Large Volume Parenteral PT Sanbe Farma Cimareme Unit III,” e-Proceeding Eng., vol. 5, no. 2, pp. 2982–2990, 2018.




DOI: https://doi.org/10.35308/jopt.v6i2.2580

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Jurnal Optimalisasi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

JOPT: Jurnal Optimalisasi Indexing and Abstracting by: