Peningkatan Kualitas Bunga Telang Melalui Perbaikan Proses Pengeringan Menggunakan Metode Taguchi

Sukma Dwi Yuliana Puspitasari Sanggup, Said Salim Dahda

Abstract


The use of Butterfly pea is widely used as a colorant in various local foods in Indonesia and Southeast Asian countries. This use is limited to foods that do not have a long shelf life. Processing and storage by drying in an effort to improve storage quality requires a special eksperimenal design to improve product quality. One of the eksperimenal designs that can be used is the Taguchi method. This research was conducted in Yosowilangun Village, Gresik Regency, there are problems that can be formulated in this study, namely "How is a good parameter setting of the factors that affect the quality in the drying process? ". This study uses the Taguchi method with 2 factors and 4 levels. The factors used are Temperature (A) and Drying Time (B). The temperature consists of 4 levels, namely 45⁰C (A), 50⁰C (B), 55⁰C (C), and 60⁰C (D). while the Drying Time consists of 4 levels, namely 30 Minutes (A), 60 Minutes (B), 90 Minutes (C), and 120 Minutes (D). The results showed that the determination of the optimal factor level was the one that obtained the smallest water content test results, which was obtained by setting the temperature factor at level 2 of 50⁰C (A2) and drying time at level 2 of 60 minutes (B2). While the decrease in the water content of the telang flower at the optimal level is 40%.


Keywords


Butterfly Pea; Taguchi; Water Content

Full Text:

PDF

References


F. S. Nabila, D. Radhityaningtyas, V. C. Yurisna, F. Listyaningrum, and N. Aini, “Potensi Bunga Telang ( Clitoria ternatea L .) Sebagai Antibakteri pada,” J. Teknol. Ind. Pangan UNISRI, vol. 7, no. 1, pp. 68–77, 2022.

A. D. Kusuma, “POTENSI TEH BUNGA TELANG (Clitoria ternatea) SEBAGAI OBAT PENGENCER DAHAK HERBAL MELALUI UJI MUKOSITAS,” Risenologi J. Sains, Teknol. Sos. Pendidikan, dan Bhs., vol. 4, no. 2, pp. 65–73, 2019, doi: 10.47028/j.risenologi.2019.42.53.

A. M. Marpaung, “Tinjauan manfaat bunga telang (clitoria ternatea l.) bagi kesehatan manusia,” J. Funct. Food Nutraceutical, vol. 1, no. 2, pp. 63–85, 2020, doi: 10.33555/jffn.v1i2.30.

S. M. Rabeta and Z. An Nabil, “Total phenolic compounds and scavenging activity in Clitoria ternatea,” Int. Food Res. J., vol. 20, no. 1, pp. 495–500, 2012.

Catrien, “Pengaruh Kopigmentasi Pewarna Alami Antosianin dari Rosela,” Canrea J., vol. 2, no. 1, pp. 32–37, 2009.

A. Rahayuningtyas and S. I. Kuala, “Pengaruh Suhu Dan Kelembaban Udara Pada Proses Pengeringan Singkong (Studi Kasus : Pengering Tipe Rak),” ETHOS (Jurnal Penelit. dan Pengabdian), p. 99, 2016, doi: 10.29313/ethos.v0i0.1663.

R. Manfaati, H. Baskoro, and M. M. Rifai, “Pengaruh Waktu dan Suhu terhadap Proses Pengeringan Bawang Merah menggunakan Tray Dryer,” Fluida, vol. 12, no. 2, pp. 43–49, 2019, doi: 10.35313/fluida.v12i2.1596.

A. Hartiati and S. Mulyani, “Pengaruh Preparasi Bahan Baku Rosella Dan Waktu Pemasakan Terhadap Aktivitas Antioksidan Sirup Bunga Rosella (Hisbiscus sabdariffa L.),” Agrotenko, vol. 15, no. 1, pp. 20–24, 2009.

A. Muawanah, I. Djajanegara, A. Sa’duddin, D. Sukandar, and N. Radiastuti, “Penggunaan Bunga Kecombrang (Etlingera Elatior) Dalam Proses Formulasi Permen Jelly,” J. Kim. Val., vol. 2, no. 4, 2012, doi: 10.15408/jkv.v2i4.270.

N. K. Ayu Martini, N. G. Ayu Ekawati, and P. Timur Ina, “PENGARUH SUHU DAN LAMA PENGERINGAN TERHADAP KARAKTERISTIK TEH BUNGA TELANG (Clitoria ternatea L.),” J. Ilmu dan Teknol. Pangan, vol. 9, no. 3, p. 327, 2020, doi: 10.24843/itepa.2020.v09.i03.p09.

M. Hartono, “Meningkatkan Mutu Produk Plastik Dengan Metode Taguchi,” J. Tek. Ind., vol. 13, no. 1, p. 93, 2012, doi: 10.22219/jtiumm.vol13.no1.93-100.

K. S. Budiasih, “Kajian Potensi Farmakologis Bunga Telang (Clitoria ternatea),” Pros. Semin. Nas. Kim. UNY, vol. 21, no. 4, pp. 183–188, 2017.

A. Irawan, M. M. M. Mualif, and ..., “Analisis Pengendalian Kualitas Proses Stamping Part 16334sf Dengan Penerapan Metode Taguchi Di Pt. Surya Toto Indonesia, Tbk,” JITMI (Jurnal Ilm. …, vol. 1, pp. 74–84, 2018, [Online]. Available: http://openjournal.unpam.ac.id/index.php/JITM/article/view/1407.

B. Musyahidah, M. Choiri2, and I. Hamdala, “Jurnal rekayasa dan manajemen sistem industri vol. 3 no. 2 teknik industri universitas brawijaya,” J. Rekayasa Dan Manaj. Sist. Ind., vol. Vol.3(2), no. 2, pp. 353–362, 2014.

D. Indrawati, A. Sutoni, and B. E. Putro, “Penerapan Desain Eksperimen Taguchi Untuk Optimasi Kuat Tekan Batako ( Studi Kasus TB . Intan Jaya ),” pp. 1–8, 2021.

Adnan, Septian Rahmat, et al. "Pengendalian Kualitas Produk Komponen Foxing pada Departemen Moulding di PT. Agung Pelita Menggunakan Metode Statistical Process Control (SPC)." Jurnal Optimalisasi 7.2 (2021): 153-163.

Pamungkas, Iing, Heri Tri Irawan, and Lian Arkanullah. "Implementasi Statistical Process Control Untuk Pengendalian Kualitas Garam Tradisional Di Kabupaten Pidie." Jurnal Optimalisasi 4.2 (2020): 108-118.

Putra, Gaustama, and Rofi Rosalinda. "Analisis Ukuran Batubara Menggunakan Metode Statistical Quality Control di PT. Mifa Bersaudara." Jurnal Optimalisasi 6.1 (2020): 47-55.

Akmal, Abdiel Khaleil, et al. "Pengendalian Kualitas Produk Paving Block untuk Meminimalkan Cacat Menggunakan Six Sigma pada UD. Meurah Mulia." Jurnal Optimalisasi 7.2 (2021): 236-248.

Sofiyanurriyanti, Sofiyanurriyanti, and Mahasin Maulana Ahmad. "PENERAPAN METODE SIX SIGMA (DMAIC) PADA UMKM KERUDUNG DI DESA SUKOWATI BUNGAH GRESIK." Jurnal Optimalisasi 5.2 (2019): 121-127.

Muzakir, Muzakir. "Analisis Pengendalian Kualitas (Quality Contol) Produk Roti Menggunakan Alat Bantu Statistik." Jurnal Optimalisasi 1.1 (2018).

Pamungkas, I., & Iskandar, I. (2022). Defect Analysis for Quality Improvement in Fishing Boat Manufacturing Processes through the Integration of FMECA and Fishbone: A Case Study. International Journal of Innovative Science and Research Technology, 7(7), 181-188. https://doi.org/10.5281/zenodo.6902249.

Qonita, Najiyatul, Deny Andesta, and Hidayat Hidayat. "Pengendalian Kualitas Menggunakan Metode Statistical Quality Control (SQC) pada Produk Kerupuk Ikan UD. Zahra Barokah." Jurnal Optimalisasi 8.1 (2022): 67-75.

Fitriadi, Fitriadi. "Pengendalian Kualitas Air Pada Perusahaan Daerah Air Minum Tirta Meulaboh Untuk Meningkatkan Layanan Kepada Masyarakat." Jurnal Optimalisasi 1.1 (2018).

Mukhlizar, Mukhlizar, and Muzakir Muzakir. "PERENCANAAN PENGENDALIAN KUALITAS BATU BATA DENGAN MENGGUNAKAN METODE SIX SIGMA PADA UD. X." Jurnal Optimalisasi 2.2 (2016).

Putra, Gaustama. "Analisis Ukuran Pori Biokomposit [Sericin-Bioplastik] Pada Berbagai Pembekuan Dengan Metode Taguchi." Jurnal Optimalisasi 3.5 (2018).




DOI: https://doi.org/10.35308/jopt.v8i2.6129

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Jurnal Optimalisasi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

JOPT: Jurnal Optimalisasi Indexing and Abstracting by: